Control Systems Engineer
Posted on: March 23, 2020
Control Systems Engineer, PCAPP (229301)
- Requisition ID: 229301
- Position Title: Control Systems Engineer, PCAPP
- Project: PCAPP
- Location: Pueblo, CO
- Relocation Authorized: National - Family
- Work Authorization: Possess right to work in the US without
- US Citizenship Required: Yes
- Surety Program: UAP
- Other Requirements: Security Investigation, Drug/Alcohol
Testing and Medical Examination, Adherence to AR (Army Regulation)
50-60, random drug and alcohol testing, Badge requirements
Project BackgroundThe Pueblo Chemical Agent-Destruction Pilot Plant
(PCAPP) will safely destroy 2,611 tons of mustard agent in mortar
rounds and artillery projectiles stored at the U.S. Army Pueblo
Chemical Depot (PCD) approximately 25 miles from Pueblo, Colorado.
Neutralization followed by biotreatment is the technology selected
by the Department of Defense to destroy the Pueblo chemical weapons
stockpile. The PCAPP plant began the operations and munition
destruction phase as of September 2016.
Candidates for unescorted access to the Chemical Limited Area must
successfully clear National Agency Check with Local Check (NACLC).
All employees are subject and agree to random drug and alcohol
testing as a condition of employment. Must be physically fit and
able to work safely at an operating plant. Eligible applicants must
be a US Citizen and successfully go through a government screening
process. Based on project goals and objectives, candidates
established within our local community are desirable.
The Pueblo Chemical Agent-Destruction Pilot Plant (PCAPP) is
looking for a Controls System Engineer at the Pueblo, CO location.
This position will report to the Automation Supervisor at the PCAPP
project. Controls Systems Engineer III reviews and coordinates
documents with suppliers, other disciplines and customers.
Coordinates technical issues with Startup & Commissioning and
provides assistance to Construction in the field. Proficient with
basic engineering deliverables such as drawings, specifications,
and Distributed Control System (DCS)/ Programmable Logic Controller
(PLC) configurations. Proficient with the development of
Human-Machine Interfaces (HMI) and the development of Control
Strategies. Proficient with process control algorithms and
proficient with DCS/PLC database programs. Knowledgeable of major
regulations and industry codes and standards applicable to
instrumentation and Controls. Properly interprets and applies codes
& standards and customer design requirements in the preparation of
Control Systems design products.
This PCAPP position falls under the scope of the McNamara-O'Hara
Service Contract Act of 1965 (SCA). The SCA requires PCAPP to
provide employees with benefits and wages no less than the amounts
the Department of Labor has established for the location and
classification in which the employee will be working.
This is a long-term assignment and this position will operate on a
DuPont shift based working schedule (up to 12 hours at a time,
rotating day and night shifts).
Principle responsibilities include, but are not limited to:
- Review Piping & Instrument Diagrams and Logic Diagrams for
control and instrumentation software requirements prepare
configuration documents to implement the software requirements, and
conduct test plans to validate implemented software.
- Contributes to maintaining the project's instrument database
using automated tools and has knowledge of the applicability of
information to be populated in the instrument database.
- Achieves work process improvement and promotes continuous work
- Champions non-proprietary electronic data interchange and
integrate automation technology where ever practical.
- Demonstrate leadership qualities with emphasis on continuous
improvement and team building, and interpersonal communication
- BS degree in Mechanical, Electrical, Chemical, Computer,
Nuclear, or Electro-Mech engineering from a US Accredited
institution with 1 year of relevant experience.
- In lieu of a degree, 5 years of Mechanical, Electrical,
Chemical, Computer, Nuclear or Electro engineering experience is
- Must be a United States citizen.
- Must be able to obtain and maintain any security clearances
required for this position according to Army Regulation 50-6
- Must be physically fit and able to work safely at a
- Must be able to obtain an EIT or FE Certification within 12
months of hire.
- Distributed Control System (DCS)/ Programmable Logic Controller
(PLC) configurations experience along with experience integrating
PLCs into a DCS system.
- Must be able to obtain a DODI 8570.01-M IAT I, II, or III
certification within 6 months of employment.
- Master's degree in Mechanical, Electrical, Chemical, Computer,
Nuclear, or Electro-Mech engineering from an US Accredited
- Working knowledge of VISIO CADD and/or PDS 2D.
- Programming experience in both Honeywell C300 system, OPC
programming and the Rockwell RS 500 logic Version 18 and under
This project is subject to the Army Regulations (AR50-6 Chemical
Surety) which governs persons performing work under the Chemical
Personnel Reliability Program (CPRP) and Unescorted Access Program
(UAP). Depending on the work performed and the access granted a
government security investigation and other physical requirements
such as respirators may be mandated. Eligibility to be placed in a
CPRP or UAP position requires US citizenship.
The following Surety Program marked with an "x" apply to this
_____ None / No Program
_____ This position is designated as a Chemical Duty Position and
is subject to the requirements of the Chemical Personnel
Reliability Program (CPRP). As a condition of employment,
candidates and incumbents must favorably complete a series of
screenings included but not limited to: a personnel security
investigation, urinalysis testing, medical exam and respiratory
screening, and must meet and maintain personnel suitability and
reliability requirements established by Army Regulations.
__X__ This position is designated as an Unescorted Access Position
(UAP). As a condition of employment, candidates and incumbents must
favorably complete a series of screenings included but not limited
to: a personnel security investigation, urinalysis testing,
respiratory screening and must meet and maintain personnel
suitability and reliability requirements established by Army
Shaping tomorrow together
Bechtel is one of the most respected global engineering,
construction, and project management companies. Together with our
customers, we deliver landmark projects that foster long-term
progress and economic growth. Since 1898, we've completed more than
25,000 extraordinary projects across 160 countries on all seven
continents. We operate through four global businesses:
Infrastructure; Nuclear, Security & Environmental; Oil, Gas &
Chemicals; and Mining & Metals. Our company and our culture are
built on more than a century of leadership and a relentless
adherence to our values, the core of which are safety, quality,
ethics, and integrity. These values are what we believe, what we
expect, what we deliver, and what we live.
Bechtel is an Equal Opportunity Employer. All qualified applicants
will receive consideration for employment without regard to race,
color, religion, sex, sexual orientation, gender identity, national
origin, or protected veteran status and will not be discriminated
against on the basis of disability.
Keywords: BECHTEL, Pueblo , Control Systems Engineer, Other , Pueblo, Colorado
Didn't find what you're looking for? Search again!